B2. Confirm proper battery capacity for vehicle application; perform battery capacity test; determine necessary action.

Confirm proper battery capacity for vehicle application; perform battery capacity test;                    determine necessary action. I accomplished this task by performing a battery capacitance test on the ford expedition in the shop. Me and lucas both came to the conclusion that the vehicle passed the test because it maintained a voltage above 9.6 volts at the end of the 15 second interval. 

B1. Perform battery state-of-charge test; determine necessary action.

 Perform battery state-of-charge test; determine necessary action.  I have accomplished this task by performing a battery state of charge test on the ford expedition in the shop as part of our battery service task sheet. I remember the percentages that the voltage value gives us of the state of charge of the battery, 12.66 being 100 percent fully charged. 

A13. Perform solder repair of electrical wiring.

            13. Perform solder repair of electrical wiring. I accomplished this task about three weeks ago. I created a fused jumper wire out of two pieces of wire, two alligator clips, and a fuse holder. I soldered those things together thus accomplishing my task of soldering electrical wire.

A12. Repair wiring harness.

            12. Repair wiring harness. I accomplished this very task by taking appart a wiring harness and showing it to Jerry while it was taken apart. I then put it back together as if it was all new parts. In this way I accomplished the task of repairing a wiring harness. 

A11. Replace electrical connectors and terminal ends.

Replace electrical connectors and terminal ends. I accomplished this by taking a wire connector and taking it apart and putting it back together the way I found it.  and it was functional.  I also installed terminal ends on wires that I used to assemble relays. 

A10. Inspect and test switches, connectors, relays, solenoid solid state devices, and wires of electrical/electronic circuits; determine necessary action. P-1.

 Inspect and test switches, connectors, relays, solenoid solid state devices, and wires of electrical/electronic circuits; determine necessary action. A accomplished this by testing switches and connectors on snap circuits in the classroom by the shop. I tested relays and learned how they work by reading the book and by completing the Argo modules and by testing the relays we had in class. 

A9. Inspect and test fusible links, circuit breakers, and fuses; determine necessary action.

Inspect and test fusible links, circuit breakers, and fuses; determine necessary action.  I accomplished this by testing the fuses in the subaru when testing the brake light switch in class about three and a half weeks ago. we tested fuses in the